1
Revised 11/19/13
Product Description
Designed for permanent attachment, PW Series
?wave whips give outstanding performance in a
rugged and cost-effective package. The antenna
is attached by placing its base through a ? (6.35
mm) hole in the product and securing it with a
nut or by threading it into a PEM-style insert. This
method of attachment is highly secure and saves
the cost of an antenna connector. The antenna
is fed through the base with RG-174 coax cable,
which may be soldered directly to the board or
attached using a 50-ohm connector. Standard
cable length is 8.5" (21.59 cm). Custom lengths
and terminations are available by special order.
Features
Low cost
Outstanding performance
Omni-directional pattern
Wide bandwidth
Flexible main shaft
Rugged & weatherized
Integral 8.5" (21.59 cm) RG-174 coax cable
Use with plastic* or metal enclosures
* Requires proximity ground plane
Electrical Specifications
Center frequency:
418Hz
Bandwidth:
80MHz
Wavelength:     
?wave
VSWR:
d 1.9 typical at center
Peak Gain:
2.9dBi
Impedance:
50-ohms
Connection:     
Case-mount
Cable:
18.5" (21.59 cm) RG-174 coax
Oper. Temp. Range:
40癈 to +90癈
Electrical specifications and plots measured on 10.16 cm x 10.16 cm
(4.00" x 4.00") reference ground plane
ANT-418-PW-QW
Data Sheet
by
Ordering Information
ANT-418-PW-QW
6.0 mm
(0.24")
7.8 mm
(0.31")
13.0 mm
(0.51")
178.0 mm
(7.01")
4.5 mm
(0.18")
0.25"
28 TPI
14.5 mm
(0.57")
52.0 mm
(2.05")
End
View